This original geometric panel is a learning example, not a cut-tested glass pattern. Open A.svg and B.svg in an SVG viewer. Both are 150 × 200 mm with six separate numbered regions. Print the two drawings at actual size, then measure the 100 mm bar on the supplied calibration page.
The orange dashed line marks the moved P01/P02 border. P05 changes material. The sketch highlights the comparison; use the bundled SVGs for exact contours and dimensions.
Write the six IDs from A in a table.
Find the same IDs in B. Trace each outline at the same scale.
Mark P01 and P02 as changed: their shared vertical border moved 10 mm. Keep P03, P04 and P06 as unchanged.
Read each piece's data-material code in the SVG text. P05 changed from blue-wispy to amber-wispy.
Prepare a replacement list containing P01, P02 and P05. Keep the other pieces on the current master but do not label them replacements.
ID
Geometry
Material
Action
P01
changed
same
replace
P02
changed
same
replace
P03, P04, P06
same
same
retain
P05
same
changed
review material
Use this as a comparison exercise only. A print check does not validate physical fit or cutting clearances.