1. Locate the attachment points
Open the deck view below. X runs fore/aft; negative Y is port. The diagram auto-fits and is not a full-size template. Point IDs identify attachments even where lines cross.
A fictional six-point training layout. Measurements are illustrative, not cutting advice. Check your physical model before using stock.
Open the deck view below. X runs fore/aft; negative Y is port. The diagram auto-fits and is not a full-size template. Point IDs identify attachments even where lines cross.
Open the side elevation. Read route passes in order: R1 H to B; R2 H to P; R3 H to S. R2 and R3 require R1. A drawing crossing alone is not a connection.
These are entered run lengths plus allowances, not lengths inferred from the drawings.
| Route | Run | Allowance | Stock |
|---|---|---|---|
| R1 | 181 mm | 15 mm | 196 mm |
| R2 | 156 mm | 15 mm | 171 mm |
| R3 | 156 mm | 15 mm | 171 mm |
| F1 total | 538 mm |
Open the PDF work pack for route cards and coordinate tables. The CSV files carry the same schedule; project.json is the editable source for TrossPlan.
Offline files: deck SVG, side SVG, routes CSV, materials CSV.